Charging System - HYOSUNG MS3 250 Sercie Manual

7-5 ELECTRICAL SYSTEM

CHARGING SYSTEM

A. C generator
◉ ◉ INSPECTION
▣ ▣ CHARGING OUTPUT CHECK
Start the engine and keep it running at 5,000 rpm.
Using the pocket tester, measure the DC voltage
between the battery terminal �
If the voltage is not within the specified value, check
the magneto no-load performance and regulator /
rectifier.
CAUTION
When making this test, be sure that the battery is
full-charged condition.
Standard charge
Pocket tester : 09900-25002
Tester knob indication : Voltage (
and � .
13.5�15.0V (at 5,000 rpm)
Regulator / Rectifier
)
IC
Regulator
Rectifier
Battery
IG. switch
IG. switch
DCV