8-21 CHASSIS
● Detach the dust seal boot ①
clip.
● Pull out the piston/cup set ②
◉ ◉ MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or
other damage.
Inspect the piston surface for any scratches or other
damage.
◉ ◉ MASTER CYLINDER REASSEMBLY
Reassemble the master cylinder in the reverse order
of disassembly.
Pay attention to the following points :
CAUTION
� � Wash the master cylider components with new
brake fluid before reassembly.
� � When washing the components, use the speci-
fied brake fluid. Never use different types of
fluid or cleaning solvents such as gasoline,
kerosine, etc.
Brake fluid specification and classifi-
cation : DOT 4
NOTE
When installing the circlip, make sure that the
sharp edge of the circlip faces outside.
and remove the cir-
and spring ③ .
③
②
①