3-35 ENGINE
● Install the movable driven face seat ① .
● Install the spring and clutch shoe assembly ② .
● Install the clutch shoe nut ③
the clutch shoe assembly.
● Tighten the clutch shoe nut ④
torque with the special tool.
Clutch shoe nut : 50 N∙ ∙ m (5.0 kgf∙ ∙ m)
Rotor holder : 09930-40113
Refer to page 3-51 installation of the movable driven
face and clutch.
BELT ROLLER
(Only for
Ensure that the belt roller shows no signs of irregular
wear and can turn freely.
while pressing down
to the specified
)
③
②
④
①