HYOSUNG MS3 250 Sercie Manual page 90

3-47 ENGINE
◉ ◉ CAM CHAIN TENSION
ADJUSTER
● Apply engine oil to the push rod.
● Unlock the ratchet mechanism and push the push
rod ①
all the way.
● Install the new gasket and cam chain tension
adjuster to the cylinder.
● Tighten the cam chain tension adjuster mounting
bolts to the specified torque.
Cam chain tension adjuster mounting
bolt : 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
● Tighten the cam chain tension adjuster bolt ②
the specified torque.
Cam chain tension adjuster bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
◉ ◉ REAR SUSPENSION ARM
● Install the rear axle nut ③ .
Rear axle nut
: 100 ~ 140 N∙ ∙ m (10.0 ~ 14.0 kgf∙ ∙ m)
● Install the rear suspension arm ④ .
①
to
③
②
④