Steering - HYOSUNG MS3 250 Sercie Manual

8-29 CHASSIS

STEERING

◉ ◉ REMOVAL AND DISASSEMBLY
● Remove the handle cover. (Refer to page 8-1)
● Remove the handlebar by removing the handlebar
set bolt ① .
NOTE
The front fork removal is not necessary unless
the steering stem replacement or front fork disas-
sembly work is required.
● Loosen the steering stem upper nut ②
special tool.
Clamp wrench : 09940-10122
● Remove the lock washer ③ .
● Loosen the steering stem lower nut ④
special tool.
Clamp wrench : 09940-10122
● Remove the steering stem spacer ⑤ .
● Remove the steering stem upper bearing ⑥ .
using the
using the
①
②
③
④
⑤
⑥