HYOSUNG MS3 250 Sercie Manual page 187

● Remove the two bolts ①
● Push the side cover for the rear side.
CAUTION
Proceed with care.
Do not damage the cover, reflector and lamp.
Handle plastic and paint-finished parts with care
to avoid scratching or damage.
● Disconnect the tail lamp coupler.
● Lift the front end of the 『Seat, side cover & rear
fender』assembly and push it for backward thor-
oughly.
● Remove the 『Seat, side cover & rear fender』
assembly ② .
◉ ◉ REAR MUD GUARD
● Remove the eight screws of the rear mud guard
③ .
◉ ◉ PASSENGER BACKREST
To remove the passenger backrest :
● Remove the four backrest cover mounting bolt ④ .
● Remove the backrest cover ⑤ .
● Remove the one backrest mounting bolt ⑥ .
● Remove the backrest ⑦ .
● Remove the two backrest bracket mounting bolt
⑧ .
● Remove the backrest bracket ⑨ .
◉ ◉ INSTALLATION
Install the exterior parts in the reverse order of
removal.
of the rear carrier.
①
⑨
⑦
CHASSIS 8-8
③
⑤
⑥
⑧
②
④