HYOSUNG MS3 250 Sercie Manual page 207

▣ ▣ FORK SPRING
● Measure the fork spring free length.
Front fork spring
free length
◉ ◉ REASSEMBLY AND REMOUNTING
Reassemble and remount the fork in the reverse
order of removal and disassembly, and also carry out
the following steps.
▣ ▣ FRONT FORK BOLT
● Apply BOND " 1215 " and THREAD LOCK " 1324 "
to the fork bolt and tighten the bolt with specified
torque.
BOND " " 1215 " "
THREAD LOCK " " 1324 " "
Front fork cap bolt : 46 Nㆍ ㆍ m (4.6 kgfㆍ ㆍ m)
Front fork clamp bolt
: 18 ~ 28 Nㆍ ㆍ m (1.8 ~ 2.8 kgfㆍ ㆍ m)
Front fork socket bolt
▣ ▣ FORK OIL
● For the fork oil, be sure to use a front fork oil
whose viscosity rating meets specification below.
Fork oil type
Capacity
▣ ▣ CUSHION SPRING
● When installing the front fork spring, the close end
should position upside.
Standard
280.4 mm (11.04 in)
: 23 Nㆍ ㆍ m (2.3 kgfㆍ ㆍ m)
TELLUS # 22
120 cc (One side)
CHASSIS 8-28
280.4 mm (11.04 in)