Starter Motor Reassembly - HYOSUNG MS3 250 Sercie Manual

◉ ◉ STARTER MOTOR REASSEMBLY
Reassemble the starter motor. Pay attention to the following points :
● Reassembly the starter motor as shown in the illustration.
● Align the match mark ①
line ②
on the housing end.
● Apply SUPER GREASE "A" to the O-ring ③
remount the starter motor.
SUPER GREASE "A"
● Tighten the stater motor mounting bolts to the
specified torque.
Starter motor mounting bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
on the housing with the
and
②
①
ELECTRICAL SYSTEM 7-10
①
③