3-37 ENGINE
ENGINE REASSEMBLY
Reassemble the engine in the reverse order of disassembly.
Pay special attention to the following points :
� � Apply engine oil to each running and sliding part before reassembling the engine.
� � Always keep the drive belt, drive faces and driven faces away from any greasy matter.
◉ ◉ CRANKSHAFT
● Install the jet ① .
● Determine the width between the webs referring to
the figure when rebuilding the crankshaft.
Width between
webs
NOTE
Standard
51.0 ± 0.1 mm
(2.008 ± 0.004 in)
①
51.0 ± 0.1 mm
(2.008 ± 0.004 in)