HYOSUNG MS3 250 Sercie Manual page 174

7-13 ELECTRICAL SYSTEM
◉ ◉ TURN SIGNAL LAMP
▣ ▣ TURN SIGNAL LAMP REPLACEMENT
These motorcycles's turn signal lamp is LED (Light
Emitting Diode) type.
If any abnormal condition are found, replace the turn
signal lamp assembly.
◉ ◉ BRAKE / TAIL LAMP
CAUTION
If you touch the bulb with your bare hands, clean
the bulb with a cloth moistened with alcohol or
soapy water to prevent premature bulb failure.
▣ ▣ BRAKE / TAIL LAMP BULB REPLACEMENT
● Lift and support the side cover with the side cover
stay. (Refer to page 2-2)
● Turn the socket ①
pull it out at the lamp housing.
● Push in the bulb, turn it to the counter-clockwise
and pull it out.
● To fit the replacement bulb, push it in and turn it to
the clockwise while pushing.
to the counter-clockwise and
①