HYOSUNG MS3 250 Sercie Manual page 191

▣ ▣ TIRE
� For inspection of the tire : Refer to page 2-23
Check the tire pressure, and examine the value for
evidence of air leakage.
SOLD RIDING
COLD INFLATION
TIRE PRESSURE
kPa
Front 172
Rear 197
▣ ▣ WHEEL BEARING
Inspect the play of the wheel bearings by finger while
they are in the wheel. Rotate the inner race by finger
to inspect abnormal noise and smooth rotation.
Replace the bearing in the following procedure if
there is anything unusual.
◉ ◉ REASSEMBLY AND REMOUNTING
Reassemble and remount the front wheel in the
reverse order diassembly and removal, and also carry
out the following steps.
▣ ▣ WHEEL BEARING
● Apply SUPER GREASE "A" to the bearings
before installing.
SUPER GREASE "A"
● Install the wheel bearings.
CAUTION
First install the wheel bearing for left side.
▣ ▣ OIL SEAL
● Install the oil seal ①
Bearing installer : 09913-76010
DUAL RIDING
2
kgf/cm psi kPa kgf/cm
1.75 25.0 172 1.75
2.00 29.0 246 2.50
with the special tool.
2
psi
25.0
36.0
CHASSIS 8-12
① ①