Magneto Cover - HYOSUNG MS3 250 Sercie Manual

◉ ◉ MAGNETO COVER
● Install the dowel pins and gasket.
CAUTION
Replace the gasket with a new one.
● Install the magneto cover ① .
● Tighten the magneto cover bolts to the specified
torque.
Magneto cover bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
◉ ◉ WATER PUMP
● Apply a small amount of engine oil to the O-ring.
● Install the O-ring on the water pump case.
CAUTION
Replace the O-ring with new one.
● Install the water pump case ② .
● Tighten the water pump case mounting bolts to
the specified torque.
Water pump case mounting bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
◉ ◉ THERMOSTAT CASE
● Install the thermostat case ③ .
● Tighten the thermostat case mounting bolts to the
specified torque.
Thermostat case mounting bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
◉ ◉ BELT ROLLER
(Only for
● Install the belt roller ④ .
● Tighten the belt roller bolt to the specified torque.
Belt roller bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
)
①
②
③
ENGINE 3-50
④