HYOSUNG MS3 250 Sercie Manual page 243

9-25 SERVICING INFORMATION
◉ ◉ FI SENSORS
ITEM
IAP sensor input voltage
IAP sensor output voltage
TP sensor input voltage
TP sensor resistance
TP sensor output voltage
IAT sensor voltage
IAT sensor resistance
TO sensor voltage
SAV solenoid voltage
Oxygen sensor heater voltage
◉ ◉ THROTTLE BODY (
ITEM
I.D. No.
Bore size
Idle rpm
Throttle cable play
◉ ◉ THROTTLE BODY (
ITEM
I.D. No.
Bore size
Idle rpm
Throttle cable play
◉ ◉ FUEL INJECTOR + FUEL PUMP
ITEM
Fuel injector resistance
Fuel injector voltage
Fuel pressure
SPECIFICATION
4.5 ~ 5.5 V
Approx. 4.0 ~ 4.2 V when ignition switch "
4.5 ~ 5.5 V
Closed
Opened
Closed
Opened
4.5 ~ 5.5 V
Refer to page 4-25
4.5 ~ 5.5 V at normal condition
(To sensor switch - "ON" at leaned more than 60。 )
Battery voltage
Battery voltage
)
SPECIFICATION
MS3-250
1,400 ~ 1,600 rpm
0.5 ~ 1.0 mm (0.02 ~ 0.04 in)
)
SPECIFICATION
MS3-125
1,350 ~ 1,550 rpm
0.5 ~ 1.0 mm (0.02 ~ 0.04 in)
SPECIFICATION
11.5 ~ 13.5
Battery voltage
Approx. 3.4 ~ 3.7 kgf/cm
㏀
Approx. 1.81
㏀
Approx. 4.75
Approx. 1.12 V
Approx. 4.18 V
36
28
Ϊ
℃
at 20 (68℉)
2
(333 ~ 363 kPa, 48.4 ~ 52.6 psi)
NOTE
" (ON)
NOTE
NOTE
NOTE