Engine Disassembly - HYOSUNG MS3 250 Sercie Manual

3-5 ENGINE
● After remounting the engine, route wiring harness,
cables and hoses properly by referring to the sec-
tions, for wire routing, cable routing and hose rout-
ing. (See pages 9-31 through 36.)
● Pour the specified amount of transmission oil.
(Refer to page 2-14)
● Pour the specified amount of engine coolant.
(Refer to page 2-16)
● Pour the specified amount of engine oil. (Refer to
page 2-12)
● Adjust the following items to the specification.
* Throttle cable play
* Idling inspect
∙∙∙∙∙∙∙
● Check for leakage of the engine oil, transmission
oil and engine coolant.

ENGINE DISASSEMBLY

CAUTION
� � Put the removed parts from the engine in order
in each component part.
� � Be careful not to cause damage on the
removed parts when handling.
● Remove the intake pipe bolts and then remove the
intake pipe ① together with the throttle body ② .
● Remove the insulator ③
Refer to page 2-11
∙∙∙∙∙
Refer to page 2-11
and O-ring.
�
①
②
③