Combination Meter - HYOSUNG MS3 250 Sercie Manual

◉ ◉ COMBINATION METER
Remove the combination meter.
Disassemble the combination meter as shown in the
illustration.
▣ ▣ INSPECTION
Using the pocket tester, check the continuity between
lead wires in the following illustration.
If the continuity measured incorrect, replace the
respective part.
Pocket tester : 09900-25002
Tester knob indication
CAUTION
When making this test, it is not necessary to
remove the combination meter.
: Continuity test (
� �
) )
) )
)
) )
ELECTRICAL SYSTEM 7-14