Engine Remounting - HYOSUNG MS3 250 Sercie Manual

● Remove the muffler connecting bolt �.
● Remove the rear brake caliper mounting bolts ① .
● Remove the rear brake hose union bolt ② .
● Remove the rear brake caliper ③ .
● Loosen the rear shock absorber lower mounting
bolt ④ , right and left.
● Support the chassis with the center stand.
● Remove the engine mounting bolt and nut ⑤ .
● Remove the engine from the frame.

ENGINE REMOUNTING

Remount the engine in the reverse order of engine
removal.
● Support the chassis with the center stand.
● Support the engine assembly with a proper engine
jack.
● Tighten the engine mounting bolt � and rear
shock absorber mounting bolt (right and left) � to
the specified torque.
Engine mounting bolt
: 40 ~ 50 N∙ ∙ m (4.0 ~ 5.0 kgf∙ ∙ m)
Rear shock absorber mounting bolt
(Upper) : 40 ~ 50 N∙ ∙ m (4.0 ~ 5.0 kgf∙ ∙ m)
(Lower) : 25 ~ 35 N∙ ∙ m (2.5 ~ 3.5 kgf∙ ∙ m)
④
③
ENGINE 3-4
�
②
①
⑤
�