Idle Gear - HYOSUNG MS3 250 Sercie Manual

3-49 ENGINE
● Install the oil pump cover ① .
● Tighten the oil pump cover mounting bolt to the
specified torque.
Oil pump cover mounting bolt
: 8 ~ 12 N∙ ∙ m (0.8 ~ 1.2 kgf∙ ∙ m)
◉ ◉ STARTER CLUTCH GEAR
● Install the starter clutch gear ②
◉ ◉ MAGNETO ROTOR
● Install the magneto rotor ④ .
NOTE
Make sure to engage the starter clutch with the
starter clutch gear.
● Screw the magneto rotor nut ⑤ .
● Tighten the magneto rotor nut ⑤
torque.
Magneto rotor nut
: 40 ~ 60 N∙ ∙ m (4.0 ~ 6.0 kgf∙ ∙ m)
◉ ◉ IDLE GEAR
● Install the starter idle gear shaft and the starter
idle gear ⑥ .
and the key ③ .
to the specified
⑤
⑥
①
②
③
④