Set The Base Station Ip Address - Avaya DECT R4 Installation Manual

3.4.4 Set the Base Station IP Address

By default a base station defaults to 192.168.0.1. The process below can be used to change the DHCP mode and IP
address of the base station.
1. Having browsed into the base station's configuration, in the left-hand column select LAN.
2. Select the IP tab.
a. Enter the required IP Address and Network Mask for the base station. The other settings are optional.
b. Click OK.
3. Select the DHCP tab.
a. Using the Mode drop-down, select Disabled.
b. Click OK.
4. The menu will prompt you with the message Reset Required. Do not click this or reset the base station at this
stage.
a. Select Reset and then select the Reset tab.
b. Click on OK.
c. Observing the base station, wait for the lower light to return to solid green.
5. Log in again using the new IP address.
DECT R4
IP Office Release 7.0 15-601047 Issue 03a (21 February 2011)
Page 52