Enable Base Station/Aiws Connection - Avaya DECT R4 Installation Manual

6.6 Enable Base Station/AIWS Connection

The IP address of the AIWS needs to be entered into the configuration of the base stations.
Master Only
1. In the left-hand panel, select UNITE. Select the Device Management tab.
2. For the Unite IP Address, enter the IP address that will be assigned to the AIWS unit when installed in the DECT
system.
3. Click OK.
Master and Slave
1. In the left-hand panel, select UNITE. Select the Status Log tab.
2. For the Unite IP Address, enter the IP address that will be assigned to the AIWS unit when installed in the DECT
system.
3. For the Unite Resource Identity enter a unique name to be associated with the base station.
4. Click OK.
5. Select the SMS tab. Again enter the IP address that will be assigned to the AIWS unit when installed in the DECT
system.
6. Click OK.
<<test via the Send Message function in AIWS interface>>>
DECT R4
IP Office Release 7.0
AIWS Installation: Run the Setup Wizard
15-601047 Issue 03a (21 February 2011)
Page 107