Enable Supplementary Services; Set The Pbx Switch Mode - Avaya DECT R4 Installation Manual

8.4.9 Enable Supplementary Services

Enabling supplementary services is required for IP Office operation.
1. In the left-hand panel select DECT. Select the Suppl. Serv. tab.
2. Select Enable Supplementary Services.
3. In the Fix Message Center No. field enter *17. This is the IP Office default short code for voicemail access. If the
IP Office has been configured to use a different short code enter that short code.
4. Click OK.

8.4.10 Set the PBX Switch Mode

The master base station needs to be informed what type of PBX it is working with and the protocol to use for
communication with that PBX.
1. In the left-hand panel select DECT. Select the Master tab.
2. Using the PBX drop-down list, select IPO.
3. Check that the Protocol is set to H.323/XMobile.
4. Click OK.
· The message Reset required! is displayed. At this stage further changes are required so do not reset the base
station.
DECT R4
IP Office Release 7.0
Non-Provisioned Installation: Master Base Station Configuration
15-601047 Issue 03a (21 February 2011)
Page 137