8.4.17 Reset the Base Station
Having completed the configuration changes, the master base station should be reset.
1. In the left-hand panel, select Reset. Select the Reset tab or Idle-Reset tab.
2. Click OK.
8.4.18 Check the Base Station
Following the reset, the operation of the radio part can be checked.
1. In the left-hand panel, select DECT. Select the Radio tab.
2. The Status should indicate Connected to Master.
3. The Received Configuration settings should match the parameters entered during configuration.
4. On the base station, LED 2 should be off.
DECT R4
IP Office Release 7.0
15-601047 Issue 03a (21 February 2011)
Page 142