Call Waiting Options - Avaya DECT R4 Installation Manual

4.4 Call Waiting Options

By default call waiting is turned on for all users. On the DECT display with a call already connected, another incoming call
will cause you to hear a single beep and the phone display will alternate between details of your current call and the
waiting call.
You can only have one connected call plus one waiting call. Any further calls will see you as being busy and will either
follow your forward on busy settings if set or else go to voicemail if available. If you don't answer the waiting call, it will
follow your forward on no answer settings if set or else go to voicemail.
If you end your current call while you have a call waiting, the waiting call will start ringing and can be answered. You can
end your current call and automatically answer the waiting call by using the Clear Call Waiting option. You can hold
78
your current call and automatically answer the waiting call by using the Hold Call Waiting option.
78
DECT R4 Page 78
IP Office Release 7.0 15-601047 Issue 03a (21 February 2011)