Create User Entries - Avaya DECT R4 Installation Manual

8.7.2 Create User Entries

Subscription requires a user entry within the master base station configuration. On completion of subscription, matching
extension and user entries are automatically created in the IP Office configuration.
1. In the left-hand panel, select Users. Select the Users tab.
2. Click new. A dialogue is displayed for entry of user details.
3. Enter the user details:
· Long Name
This name is used for information within the DECT R4 system settings.
· Display Name
This name displayed on the phone when idle. It is also the name used for the user created in the IP Office
configuration. The name must be unique.
· Number
This will be the extension number of the phone on both the IP Office and DECT R4 systems. The number must
be unique.
The remaining two fields should not be completed if you want to use anonymous subscription. This removes the
requirement of knowing the phone IPEI numbers during installation.
· IPEI/IPDI
Enter the phones IPEI number. For 3720, 3725 phones this is printed on the label inside the phones battery
compartment.
· For 3720, 3725, 3740 and 3749 phones, the IPEI can be displayed by selecting Menu | Settings |
Device Info | IPEI/IPDI. It is also printed on a label under the phone's battery.
· Auth. Code
Enter the account code that should be used when the phone is subscribed.
4. Click OK.
5. Repeat the process for any other phones that you want to subscribe.
DECT R4
IP Office Release 7.0 15-601047 Issue 03a (21 February 2011)
Page 158