Run The Setup Wizard - Avaya DECT R4 Installation Manual

6.5 Run the Setup Wizard

1. Access the AIWS using your browser.
2. If the unit is defaulted, the setup wizard is run automatically. If the unit already has configuration settings, then
from the menu displayed select Setup Wizard.
3. Click Next. Enter the network address settings for the AIWS unit.
· Set the network parameters mode to Manually.
· Host Name
Enter a name to help identify the AIWS on the network.
· IP Address/Subnet Mask
Enter the static IP address details that the AIWS should use.
· Set the remaining details to match those being used by other devices on the network.
DECT R4
IP Office Release 7.0
AIWS Installation: Browse the AIWS
15-601047 Issue 03a (21 February 2011)
Page 101