Installing The System Base Software From Cd; Preparing For Software Installation - Avaya Interactive Response Installation Manual

Installing the system base software from CD

This section explains how to install the system base software from CD media. You are
required to install the system software from CD when:
•
You purchase a software-only system and need to install the Avaya IR software on a
separately obtained hardware platform
•
You need to rebuild the Avaya IR system from CD media (such as for disaster recovery
purposes).
Note:
Another method of rebuilding your system is to restore the system from
backup, which may be preferable if you have applications, data, and feature
administration that also needs to be restored. For more information, see
Restoring the system from backup.
If you p on page 63urchased the IR system from Avaya with the hardware platform, see
Setting up pre-installed software on page 21 for information on how to configure the pre-
installed system software.
This section includes the following topics:

Preparing for software installation................................................... 31

Software packages installed from CD ............................................. 32
Installing system software ............................................................... 33
Preparing for software installation
To install the Avaya IR system base software, you need the following CDs:
•
Avaya IR R1.2 Solaris OS for Sun Blade 150 - CD 1 or
Avaya IR R1.2 Solaris OS for Sun Fire 280R - CD 1
•
Avaya IR R1.2 Software Packages - CD 2
•
Avaya IR R1.2 Core Packages - CD 3
You must have a console connection to the platform on which you are installing the software.
Each platform as the following minimum console requirements:
•
Sun Blade 150 must have one of the following:
Issue 1.0 September 2003 31