3.3.6 Select Simplified Administration
By default, except on Compact Base Station, all the base station menus and options are visible, including numerous
settings that are not applicable for IP Office operation. By turning off advanced options, only those menus and settings
applicable to IP Office mode are shown. While this is not necessary for installation it is recommended.
This process is not necessary on the Compact Base Station as these have the advanced options hidden by default.
1. Select General | Admin.
2. Deselect Show Advanced Options.
3. Click OK.
a. Select Reset and then select the Reset tab.
b. Click on OK.
c. Observing the base station, wait for the lower light to return to solid green.
DECT R4
IP Office Release 7.0
15-601047 Issue 03a (21 February 2011)
Page 44