Avaya DECT R4 Installation Manual page 119

Tools
· Programming PC with DECT R4 software.
· Web browser.
· Drill and drill bits suitable for the selected wall mounting position of the AIWS.
· Screwdrivers for use with the screws selected for AIWS wall mounting.
Phone Subscription Requirements
Information
· Service user name and password for IP Office configuration.
· User names and extension numbers for the DECT phones.
· Phone IPEI numbers if using an pre-configured installation mode.
Tools
· IP Office Manager.
· Device Manager
The software installed on each handset may need to be upgraded to match that supplied with the
. This is done using the Windows Device Manager software to upgrade phones via an advanced charger or
30
using AIWS Device Manager
· Web browser (Internet Explorer or Firefox are supported).
AIWS Installation Requirements
Parts Required
· o AIWS Unit which includes:
· o AIWS Unit
· o AIWS Power Supply unit and selection of IEC60320 C7 power leads (CEE7/16 (Europlug), BS1363, NEMA1-
15 and AS/NZS 3112).
· o 1.2 metre (4 foot) LAN cable.
If this is replaced with a longer cable the replacement should be a CAT5 Ethernet LAN cable.
· o AIWS License sheet.
· o 3 x 3.5mm Screws and suitable wall plugs for the wall mounting of the AIWS.
· o LAN Socket
· o Mains power outlet socket.
Information
· o IP Address for the AIWS
· o Other standard network settings (Default Gateway, DNS, WINS)
· o AIWS License Key (this should have been supplied with the AIWS)
· o IP Address of the DECT Master base station.
· o IP Address of the IP Office
· o Preferred time settings (date format, time format)
· o Wall mounting location selected for the AIWS
· o Access information (name and password) for configuring the base stations.
Tools
· o Programming PC with DECT R4 software.
DECT R4
IP Office Release 7.0
to upgrade phones over the air.
83
Non-Provisioned Installation:
DECT R4 software
15-601047 Issue 03a (21 February 2011)
Page 119