Avaya DECT R4 Installation Manual page 118

8. Non-Provisioned Installation
This method of installation is used with pre-IP Office Release 7.0 systems and systems that include handsets that do not
support IP Office provisioning.
· When to Use Non-Provisioned Installation
The use of IP Office provisioned installation
no 3720, 3720, 3740 or 3749 phones.
· It is assumed that you are familiar with installation and configuration of IP Office systems.
Information
· Service user name and password for IP Office configuration access.
· Service user name and password for IP Office security settings access.
· IP Office IP address.
· Avaya IP Endpoint licenses
Parts Required
· IP Office Release 7.0 software DVD or image of the IP Office Release 7.0 admin software.
Tools Required
· Programming PC with IP Office Manager application installed. You must have rights on this PC to change its IP
address settings unless it is a DHCP client.
· Software for zip file extraction.
Base Station Installation Requirements
Parts Required
· Base station
Includes:
· Base station.
· Two 3.5mm screws and two 6mm wall plugs suitable for wall mounting onto a solid wall (brick or similar).
· 1.2 metre (4 foot) LAN cable. If this is replaced with a longer cable the replacement should be a CAT5 Ethernet
LAN cable.
· If using Power over Ethernet:
· The base station supports Power over Ethernet, IEEE 802.3af, class 2.
· If not using Power over Ethernet:
· Base station power supply unit.
Required if not using Power over Ethernet to power the base station. Note that the base station power supply
units include an 8 metre (26 feet) cable from the PSU to the base station. Check that you have the correct type
of power supply unit for the locale.
· BSX-0013: Europe (except United Kingdom).
· BSX-0014: United Kingdom.
· BSX-0015: USA/Canada.
· BSX-0016: Australia.
· Mains power outlet socket.
· LAN Socket.
Information
· DECT R4 SARI.
· Base Station IP Addresses.
· Detailed plans from the site survey indicating the intended base station locations, LAN sockets and if necessary
power supply outlets.
DECT R4
IP Office Release 7.0
is recommended for all installations except those that contain
28
15-601047 Issue 03a (21 February 2011)
Page 118