Access The Base Station Configuration - Avaya DECT R4 Installation Manual

3.3.3 Access the Base Station Configuration

1. Depending on whether DHCP is being used or not:
· If connected directly to the base station, change your programming PC's network address to 192.168.0.200
with subnet mask 255.255.255.0. Connect the LAN cable from your PC to the base station.
· If both your PC and the base station are connected to a LAN network with DHCP server, ensure your PC is set
to act as a DHCP client or has a fixed address that is valid on the network.
2. Start your web browser and enter the http:// or https:// followed by the IP address of the base station. The default
IP address is 192.168.0.1. If a security certificate warning is displayed, select to continue to this website.
3. The base station should respond with its initial configuration menu.
4. Select System administration. A password entry dialog will be displayed. Enter the default user name (admin)
and password (changeme).
5. The configuration menu for the base station is displayed.
6. Note the software levels shown in the Version screen. These will determine whether the base station software needs
to be upgraded.
DECT R4
IP Office Release 7.0 15-601047 Issue 03a (21 February 2011)
Page 40