Performing A Survey - Avaya DECT R4 Installation Manual

2.4 Performing a Survey

· While performing a survey you will require the following information:
· Building Layout
Accurate building plans are an essential aid to both the site survey and also for later fault analysis. Ensure that
you have an accurate plan of the customer premises, including the locations of mains power outlets and
network connection points.
· The area of coverage required?
Which areas within the plans the customer expects to be covered. Do they expect coverage outside the building
and or in buildings separate from the main building.
· The number of simultaneous users within different areas?
Each base station can support up to 8 simultaneous calls (4 for a Compact Base Station).
· Perform the survey during normal business hours. The movement of large items of machinery, such as lifts and
shutter doors, will then be observable during the survey.
· Ensure that you have read this documentation and understand the requirement of both
base station synchronization
· As the survey takes place, note whether additional network connection points will be required and or mains power
outlets. Consider the use of Power over Ethernet, if possible in order to simplify base station installation.
DECT R4
IP Office Release 7.0
.
23
phone handover
15-601047 Issue 03a (21 February 2011)
and
22
Page 24