Phonebook Integration; Slave Base Station Setup - Avaya DECT R4 Installation Manual

3.3.11 Phonebook Integration

In an IP Office provisioned installation, the phonebook settings are automatically set by the IP Office system. However use
of IP Office users, groups and directory as part of the DECT phone directory still needs to be enabled if required. If not
enabled, the Central Phonebook functions on the DECT phones will not work.
1. Select Phonebook.
2. Select Enable.

3.4 Slave Base Station Setup

The slave base station configuration for a provision installation consists of the following steps:
1.Default the Base Station
2.Determine the Base Station IP Address
3.Access the Base Station Configuration
4.Set the Base Station IP Address
5.Update the Base Station Software
DECT R4
IP Office Release 7.0
.
50
.
50
.
51
.
52
.
53
Provisioned Installation: Master Base Station Setup
15-601047 Issue 03a (21 February 2011)
Page 49