10. Lift-Arm/Drive Controls; Chapter Overview; Personal Safety; Machine Preparation - Terex PT-100G Forestry Service Manual

Compact track loader
Hide thumbs Also See for PT-100G Forestry:
Table of Contents

Advertisement

Chapter Overview

This chapter provides removal and installation
procedures for the lift-arm and drive control
components.

Personal Safety

Improper or incomplete maintenance/repair of a Compact
Track Loader can be dangerous and may result in machine
damage, injury or death.
Do not attempt to perform any type of repair or maintenance
on a Compact Track Loader until you have read and fully
understood the information in this manual. Refer to the
Operation and Maintenance manual for instructions
regarding proper machine operation techniques before
operating any Compact Track Loader.
Prior to performing any type of service work on a Compact
Track Loader, read and understand Chapter 1 (Product
Safety) for personal safety information.

Machine Preparation

Accidental machine starting can cause injury or death to
personnel working on a Compact Track Loader.
As a precaution, disconnect the battery cables from the
battery terminals, tape the battery clamps and remove the
key from the ignition switch prior to performing any service
work on a Compact Track Loader.
Place a "Do Not Operate" tag prominently on the machine to
inform personnel that the machine is being worked on.

10. Lift-Arm/Drive Controls

Removal and Installation
Removal and installation procedures are provided for
the following lift-arm/drive control components.
Electric Control Joystick
Lift Arm Control (loader) Valve
Note: Procedures are provided for only those lift-arm/drive
control components listed above. However, exploded parts
diagrams exist in the PT-100G Parts manuals to serve as
visual aids in the assembly and disassembly of other system
components.
Refer to page 3-2 and 3-3 for pictorial views of the
Note:
hydraulic auxiliary and drive systems and components.
Electric Control Joystick
Removal
Required Tools
Side Cutter
Combination/Open End/Socket Wrenches
Note: The procedures for removing and installing the right
and left joysticks are basically identical. As a result, only the
procedures for the right joystick are described in this section.
10-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt100g

Table of Contents

Save PDF