Terex PT-100G Forestry Service Manual page 135

If a new software version is available for
Software version update
your machine, it must be downloaded to
the onboard computers in order to take
effect. To download the update:
1. Visit: constructionsupport.terex.com
to download the latest version of the
software for your machine.
2. With the machine connected to the
laptop, ignition key in the "on" posi-
tion and the service tool up and run-
ning, select "file" and then "file down-
load" from the drop down list.
3. When you see the "File Download"
pop-up displayed, select the compo-
nent you wish to update.
• Display
• Main Controller
4. You will then be prompted to find the
new version file to download. Locate
it on your computer and click "open".
The "DownloadFile Tab" will then
appear as shown at right. Click "start
download" to begin the process.
5. A confirmation window will then
appear ensuring you wish to contin-
ue and displaying the current soft-
ware version. Type in the new soft-
ware version (found in the filename
located in step 4) in the format
shown at right (do not include
periods in the file name).
6. Once you have typed the new ver-
sion in to confirm the update, click
"ok" to begin the download. Once
finished, you may confirm the update
by looking at the "software version"
screen in the display. It will display
the current version and should
reflect the version you have just
installed.
Note: Do not disconnect the laptop from
the onboard systems during the down-
load.
19-9
Compact Track Loader
19. Service Tool