Removal Procedure; Engine - Terex PT-100G Forestry Service Manual

Filter Housing
12-19
6. Remove the lower bolt located on the engine com-
partment side of the loader tower that secures the
air cleaner housing bracket to the chassis. Follow
the bracket upward to locate the second bolt and
remove it as well (fig. 12-19).
7. Remove the air cleaner housing from the
compartment.
Installation
1. To install the air cleaner assembly, reverse the

removal procedure.

Engine

Removal
Required Tools
Bolts
Combination/Socket Wrenches
Tie Down or Ratchet Strap
Forklift/Engine Hoist
Pry Bar
1. Perform the battery, air cleaner, and charge pump,
removal procedures in sections 11 and 12 of this
manual prior to starting this procedure.
2. Remove the hood assembly as described on page
7-5 of this manual.
3. Raise and support the operator enclosure (cab) as
described on page 4-2 of this manual.
4. Perform steps 2-7 of the exhaust removal
procedure on page 12-2 of this manual.
5. Remove the center belly pan from the machine.
12-20
6. Loosen the hose clamp on the lower radiator hose
on the right side of the engine (fig. 12-20).
12-21
7. Loosen the hose clamp on the fuel line located
on the injection pump on the right side of the
engine (fig. 12-21).
12-5
Compact Track Loader
12. Engine