Radiator/Oil Cooler/Fan Shroud; Removal - Terex PT-100G Forestry Service Manual

Radiator/Oil Cooler/Fan Shroud

Removal

Personal injury can result from exposure to hot
fluids and components. Allow the machine to
cool thoroughly before attempting any type of
service on the cooling or hydraulic systems.
Cooling system conditioner contains alkali.
Avoid contact with skin and eyes.
Collect and contain liquids in suitable containers.
Dispose of all liquids according to local regulations and Note:
mandates.
Required Tools
Socket Wrench
Pliers
Screwdriver
Hydraulic Caps/Plugs (various sizes)
1. Perform the fan guard and fan removal procedures
found in this chapter.
2. Remove the bolts (3) securing the left rear access
cover to the chassis.
8-7
3. Twist the valve control counter clockwise to drain
the cooling system (fig. 8-7).
8-8
4. Remove the bolts (6) securing the outer shroud to
the chassis, then remove the shroud (fig. 8-8).
8-9
5. Remove the upper hydraulic cooler hose. Cap or
plug the exposed ends of the engine, cooler, and
hose upon removal (fig. 8-9).
Drain Valve
8-10
6. Loosen and disconnect the lower hydraulic line
from the cooler. Cap and plug the line and cooler
opening upon disassembly (fig. 8-10).
8-3
Compact Track Loader
8. Radiator and Oil Cooler