Installation Procedure; Fan - Terex PT-100G Forestry Service Manual

Compact Track Loader
8. Radiator and Oil Cooler
8-2
2. Remove the fan guard from the machine by sliding
it upward (fig. 8-2).
Installation
1. To install the fan guard, reverse the removal
procedure.

Fan

Removal
Required Tools
Combination Wrench
Socket Wrench
8-3
1. Remove key to avoid accidental start, then remove
the bolts (2) securing the fuel pump/filter assembly
to the radiator support and lay it aside over the
bumper to allow clearance to remove the shroud
and fan (fig. 8-3).
8-4
2. Remove the bolts (6) securing the radiator and
shroud to the radiator support (fig. 8-4).
3. Push the shroud forward to allow access to the fan
mounting bolts.
8-5
8-6
4. Remove the nuts (4) securing the fan to the
engine, then remove the fan from between the
shroud and radiator as shown
(fig. 8-5, 8-6).
Installation
1. To install the fan, reverse the removal procedure.
8-2