15. Quick Attach; Chapter Overview; Personal Safety; Machine Preparation - Terex PT-100G Forestry Service Manual

Chapter Overview

This chapter provides removal and installation proce-
dures for the quick attach and associated components.

Personal Safety

Improper or incomplete maintenance/repair of a Compact
Track Loader can be dangerous and may result in machine
damage, injury or death.
Do not attempt to perform any type of repair or maintenance
on a Compact Track Loader until you have read and fully
understood the information in this manual. Refer to the
Operation and Maintenance manual for instructions regard-
ing proper machine operation techniques before operating
any Compact Track Loader.
Prior to performing any type of service work on a Compact
Track Loader, read and understand Chapter 1 (Product
Safety) for personal safety information.

Machine Preparation

Accidental machine starting can cause injury or death to per-
sonnel working on a Compact Track Loader.
As a precaution, disconnect the battery cables from the bat-
tery terminals, tape the battery clamps and remove the key
from the ignition switch prior to per-forming any service work
on a Compact Track Loader.
Place a "Do Not Operate" tag prominently on the machine to
inform personnel that the machine is be-ing worked on.
Removal and Installation
Removal and installation procedures are provided for
the following quick attach components.
Quick Attach locking Pin Assemblies
Quick Attach Pivot Pins
•
•
Note: Procedures are provided for only those quick attach
components listed above. However, exploded parts diagrams
exist in the PT-100G Parts manual to serve as visual aids in
the assembly and disassembly of other system components.
Locking Pin Assembly
Removal
Required Tools
Combination/Open End/Socket Wrenches
Terex Approved Jack Stand (or equivalent)
Remove any attachment, lower or safely sup-
port the lift arms and make sure the hydraulic
oil is cool before removing any components or
lines. Hot or pressurized oil can cause personal injury.
15-1
1. Rest the lift arms on an Terex approved jack stand
to provide clearance for quick attach disassembly.
(fig. 15-1)
15-1

15. Quick Attach