Terex PT-100G Forestry Service Manual page 87

13-28
5. Remove the bearing out of the front of the hub as
shown (fig. 13-28).
13-29
Part #: 0403-337
Part #: 0403-334
13-30
6. Press the center seal and front bearing race out of
the assembly from the rear of the hub using tools
0403-337 and 0403-334 (fig. 13-29, 13-30).
Note: The center seal will be destroyed during removal
and must be replaced upon reassembly.
13-31
7. If bearings are to be replaced, press the rear bear-
ing race out of the assembly from the front of the
hub with tools 0403-337 and 0403-333 (fig. 13-31).
Center seal
Front race
13-32
8. Press the bearing sleeve out of the rear bearing
using tool 0403-336 (fig. 13-32).
Center seal
Front race
13-33
9. Remove the face seals and retaining ring from the
bearing sleeve for cleaning and or replacement
(fig. 13-33).
13-7
Part #: 0403-337
Rear race
Part #: 0403-333
Retaining ring
Compact Track Loader
13. Undercarriage
Part #: 0403-336