Installation Procedure; Foot Throttle Assembly - Terex PT-100G Forestry Service Manual

Compact Track Loader
7. Chassis & Fuel Tank
7-12
4. Remove the bolts (4) that secure the foot pedal
cover to the pedal, then remove the cover and the
throttle boot (fig. 7-12).
Pry Off
7-13
5. Pry the throttle cable off of the ball stud on the foot
pedal. (fig. 7-13)
Bolts
7-14
6. Remove the bolts securing the footwell assembly
to the chassis (fig. 7-14).
Ball Stud
Throttle Cable
7-15
7. Remove the footwell from the chassis as shown
(fig. 7-15)
Installation
1. To install the footwell, reverse the removal
procedure.

Foot Throttle Assembly

Removal
Required Tools
Screwdriver
Combination/Socket Wrench
Note: The foot throttle assembly may be removed with
the footwell still installed in the machine.
1. Perform steps 3 and 4 of the footwell removal
procedure.
7-16
2. Remove the bolts (2) and associated hardware
securing the foot throttle assembly to the footwell
(fig. 7-16).
7-4
Bolts
Pry Off