Terex PT-100G Forestry Service Manual page 97

14-16
10. Remove the pin from the cylinder while supporting
the cylinder. (fig. 14-16)
14-17
11. Remove the cylinder from the machine. (fig. 14-17)
Installation
1. To install a bucket/tilt cylinder, reverse the removal
procedure.
Quick Coupler Block PRV
Removal
Required Tools
Combination Wrench
14-18
1. With the machine off and cool and with all
hydraulic actuators relaxed, loosen the pressure
release valve on the top of the auxiliary quick cou-
pler block. (fig. 14-18)
14-19
2. Once loose, remove the valve from the block by
twisting it counter-clock-wise until free. (fig. 14-19)
Installation
1. To install the Q/C PRV, reverse the removal proce-
dure.
14-5
Track Loader
Compact
14. Lift-Arm Components