Table of Contents
Advertisement
Note: Record the order of assembly during removal to
ensure proper operation when re-installed.
3. Remove the foot throttle from the machine.
Installation
1. To install the foot throttle assembly, reverse the
removal procedure.
Hood Assembly
Removal
Required Tools
Screwdriver
Combination/Socket Wrench
7-17
1. Remove bolts from hood spring tension bracket on
each side of machine (fig. 7-17).
7-18
2. Attach lifting device with hood in open position as
shown in 7-18.
3. Remove the allen head bolts from each side of
4. Remove hood from machine using lifting device.
Installation
1. To install the hood assembly, reverse the removal
bolt
Lift point
7-5
7-19
the hood hinges (fig. 7-19).
procedure.
Compact Track Loader
7. Chassis & Fuel Tank
Advertisement
Table of Contents
Troubleshooting
