Attachments; Machine Labels And Decals; Product Identification Number - Terex PT-100G Forestry Service Manual

Compact Track Loader
1. Product Safety

Attachments

Only use attachments that are recommended by Terex.
Make sure that all necessary guards and protective
equipment are in place and functioning prior to operat-
ing any attachment.
Wear protective glasses and protective equipment as
required by conditions or as recommended in the
attachment's operation manual.
When replacement parts are required for your
machine, use only genuine Terex replacement
parts or parts that meet or exceed original
specifications including, but not limited to physical
dimensions, type, strength and material.
Installing lesser components can lead to premature
failures, product damage, personal injury or death.
Ensure that all personnel are far enough away from
the work area so they will not be struck by flying ob-
jects.
Stay clear of the cutting edges, pinching surfaces or
crushing surfaces of the attachment while performing
any attachment maintenance, testing or adjustments.

Machine Labels and Decals

Labels and decals placed on the machine provide
safety information and operating instructions.
Familiarize yourself with the location and significance
of these labels to ensure your safety.

Product Identification Number

The Product Identification Number (PIN) is located on
the front of the cab enclosure (figure 1-1). Always pro-
vide the PIN when contacting the dealer about parts,
service, warranty or accessories. No warranty claims
will be processed unless the PIN is provided.
1-1
Safety Label Examples
Examples of the labels and decals displayed on the
machine are shown on this page.
WARNING
WARNING
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
WARNING
WARNING
CRUSH HAZARD
Contact with moving machine can
result in death or serious injury.
WARNING
WARNING
Fall Hazard
Serious injury or death can result
from falling.
WARNING
WARNING
Injection Hazard
Escaping fluid under pressure can
penetrate skin, causing serious injury.
WARNING
WARNING
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
WARNING
WARNING
Entanglement Hazard
Rotating parts can cause personal injury.
WARNING
WARNING
Burn Hazard
Hot fluid under pressure can scald.
1-4
Keep clear of lift arms and
attachments.
Keep clear of moving machine.
2030-593
Use the provided access system when
entering or exiting the machine.
• Relieve internal pressure before
disconnecting any line or fitting.
• Keep away from leaks or pinholes.
• Use cardboard to check for leaks.
Fluid injected into skin must be surgi-
cally removed within a few hours by a
doctor familiar with this type of injury
or gangrene will result.
Install lift arm brace prior to servicing.
Keep away from fan and belt while the
engine is running. Stop engine before
servicing.
2030-600
Allow the machine to cool thoroughly
before opening.
2030-595