Mfp Stapler Assembly Sensor (Paddle Hp) Removal - Dell 5535dn Service Manual

MFP stapler assembly sensor (media stack) removal
1. Remove the top cover. See "MFP stapler assembly top cover removal" on page 4-204.
2. Disconnect the harness to the sensor (media stack).
3. Using your fingers, pinch tab (A) securing the sensor (media stack) and remove.

MFP stapler assembly sensor (paddle HP) removal

1. Remove the left cover. See "MFP stapler assembly left cover removal" on page 4-204.
2. Disconnect the harness to the sensor (paddle home position).
A
4-215
Repair information