Dell 5535dn Service Manual page 53

Error
code or Error contents
message
202.25 Paper jam around
fuser exit or redrive
area.
Type 2 fuser
202.26 Sensor (fuser output)
lingering jam.
Destination is
standard bin.
Type 2 fuser
202.27 Sensor (fuser output)
lingering jam.
Type 2 fuser
202.28 Sensor (narrow
media) static jam
Type 2 fuser
202.29 Sensor (fuser output)
bounce
Type 2 fuser
202.30 Never sent the divert
command to the
stacker.
Type 2 fuser
202.31 Sensor (fuser output)
static jam
Type 2 fuser
202.32 Sensor (fuser output)
lingering jam.
Type 2 fuser
Description/Action
Page may be jammed in fuser
exit or redrive area.
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
and
Media did not reach the sensor
(narrow media)
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
Media remains on the sensor
(narrow media) during the
warm up sequence.
The sensor (fuser output)
rebounded once the trailing
edge of the media passed.
Media remains on the sensor
(fuser output) during the warm
up sequence.
Media reached the sensor
(fuser output) but did not clear
it in the specified time.
Possible repair actions
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Go to sensor (fuser output)
service check.
5. See "Sensor (fuser
output) service check" on
page 2-107.
6. Go to sensor (narrow
media) service check. See
"Sensor (narrow media)
service check" on
page 2-108.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check"
on page 2-133.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check"
on page 2-133.
Go to sensor (narrow media)
static jam service check.
See "Sensor (narrow media)
static jam service check" on
page 2-136.
Go to sensor (fuser output)
service check.
See "Sensor (fuser output)
service check" on
page 2-107.
Go to sensor (fuser output)
static jam service check.
See "Sensor (fuser output)
static jam service check" on
page 2-135.
Go to sensor (fuser output)
lingering jam service check.
See "Sensor (fuser output)
lingering jam service check"
on page 2-133.
Diagnostic information
2-21