Dell 5535dn Service Manual page 38

Error
code or
message
42.XY
50
51
52
54A
2-6
Service Manual
Error contents
Cartridge Region
Mismatch
PPDS Font Error
Defective Flash
Flash Full
Serial Option [x] Error
Description/Action
This IR is displayed when the
printer detects that the installed
cartridge has a region that
differs from the below options.
To clear this IR, the printer
cartridge must be replaced with
one that has a proper region.
X and Y can have the following
values:
0 : Worldwide region or
Undefined region
1 : America
2 : EMEA
3 : Asia
4 : Latin America
9 : Invalid region
This message displays when
the PPDS interpreter has
encountered a font error.
Note: This error may only
occur when the printer is
formatting PPDS print data.
This message displays when
the printer detects a defective
flash. This error may occur at
power on, or during flash
format and write operations.
This message displays when
the printer detects an
unformatted flash at power on.
This IR is displayed when a
serial error (framing, parity or
overrun) has been detected on
the specified optional serial
port. This usually indicates that
the serial port has not been set
up correctly.
Once a host interface error has
been displayed for the first
time, reporting of further host
interface errors for the
associated port is suppressed
until the interface parameters
are changed for the
associated, or the machine is
powered off.
Possible repair actions
Install a new toner cartridge
that matches the correct
regional specification.
The following actions may be
taken:
• Press to clear the
message and continue
processing the job.
• Press until Busy/
Waiting appears. The
following are available:
- Cancel Job
- Reset Printer
- Reset Active Bin
Press to clear the
message. The flash is marked
as bad and normal operation
continues. Flash operations
are not allowed until the
problem is resolved.
Press to clear the
message. The flash is marked
as bad and normal operation
continues. Flash operations
are not allowed until the flash is
formatted.
Go to network service check.
See "ADF & Scanner Related
Troubleshooting" on
page 2-171.