MFP stapler assembly sensor (tamper HP left and right) removal
1. Remove the top cover. See "MFP stapler assembly top cover removal" on page 4-204.
2. Disconnect the harness to the sensor (tamper HP left and right).
3. Using your fingers, pinch the tabs (A) securing the staple finisher sensor (tamper HP left and right) and
remove.
MFP stapler assembly sensor (bin full send) removal
1. Remove the stapler/stacker controller card assembly. See "Stapler/stacker controller card assembly
removal" on page 4-213.
A
4-217
Repair information