6. Remove the two screws (C) securing the USB cable (D) to the upper panel.
7. Disconnect the USB Cable.
C
D
Operator panel door assembly removal (models X651, X652/5535dn, X654, and X656)
1. Remove the laser cover. See "Laser cover removal (models X651, X652/5535dn, X654, and X656)"
on page 4-106.
2. Remove the counter balance springs (A) on both sides.
3. Remove the print cartridge cover springs (B) on both sides.
4. Remove the E-clips (C) on both sides securing the links to the hinges, and remove the links.
4-115
Repair information