Switch (ADF closed interlock) jam service check
Step
1
1. Enter the diagnostic mode
2. Select Scanner tests
3. Select Sensor tests
4. Observe the line item "sensor (ADF closed interlock)"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
2
Check the above sensor for proper connection.
Is the above sensor connected properly?
Check
Yes
The sensor is
Go to step 2.
working properly
Replace the
Replace the
sensor (ADF
connection.
closed interlock).
Go to "Switch
(ADF closed
interlock)
removal" on
page 4-84.
Diagnostic information
No
2-111