6. Remove the two thumb screws (A) on both sides of the ADF unit.
7. Slide ADF unit to the rear, lift up, and remove the ADF unit assembly.
Replacement note: You must adjust skew after reinstalling the ADF unit assembly. Go to "Adjusting skew"
on page 3-93.
ADF left hinge removal
1. Remove the ADF unit assembly. See "ADF unit assembly removal (models X651, X652/5535dn, X654,
and X656)" on page 4-85 or "ADF unit assembly removal (model X658)" on page 4-85.
2. Remove the ADF feed motor bracket assembly with cable. See "ADF feed drive motor assembly
removal" on page 4-77.
4-86
Service Manual
A