Stapler/stacker controller card assembly removal
1. Remove the left left cover. See "MFP stapler assembly left cover removal" on page 4-204.
2. Disconnect all harnesses to the controller card.
3. Remove the three screws (A) securing the stapler/stacker controller card assembly.
4. Remove the stapler/stacker controller card assembly.
MFP stapler assembly paddle drive motor assembly removal
1. Remove the left left cover. See "MFP stapler assembly left cover removal" on page 4-204.
2. Disconnect the paddle motor harness from the controller card.
3. Remove the cable from the harness clip.
A
4-213
Repair information